卫生和环境卫生监测

A handheld sanitation verification instrument that accurately detects ATP from surfaces and rinse waters.

The AccuPoint Advanced Surface Sampler is an ATP detection swab uniquely designed for best results from environmental surfaces.

The AccuPoint Advanced Access Sampler is an ATP detection swab uniquely designed for best results from narrow, hard-to-reach areas like filler heads and nozzles.

The AccuPoint Advanced Water Sampler is an ATP detection swab uniquely designed for best results from rinses.

AccuClean Advanced is intended to be used as a simple method to determine the cleanliness of food contact surfaces and equipment.

Verifies instrument calibration. Only compatible with the AccuPoint Advanced Next Generation ATP Reader.

The sampler extender is in use with the AccuPoint Advance ATP Samplers to extend the sampler handle by 6".

Used to clean debris off the lens of the AccuPoint Advanced Next Generation ATP Reader.

Paired with the wall charger for power supply. Also used for data transfer from reader to PC.

Compatible with the AccuPoint Advanced Next Gen ATP reader with interchangeable wall plates for international use.

Protects instrument from impact and provides extra sampler storage.

Compatible with the AccuPoint Advanced Next Gen ATP wall charger.

AccuPoint® Advanced Sanitation Verification System is a handheld ATP reader that accurately detects ATP from surfaces and rinse water samples.

Provides hands-on training on the appropriate use and application of the AccuPoint ATP sanitation monitoring system.

Clean-Trace® Surface ATP is a single-use test device that contains a swab for the collection of a sample from a surface. The swab is pre-moistened to aid in sample collection and processing.

Clean-Trace® Luminometer is a simple, quick and reliable hand held diagnostic tool to verify cleaning effectiveness and capture, store and manage data for later analysis.

ATP reagent control kit for use with the Neogen® Microbial Luminescence System (MLS), 22.5ng/vial.

Clean-Trace® Surface Protein Plus Test Swab is a simple, quick, and reliable method of checking for the removal of protein residues after cleaning and quickly identifies contamination.

Clean-Trace® Water Plus - Total ATP is designed to rapidly assess equipment sanitation processes and the efficiency of Clean in Place (CIP) procedures.

Clean-Trace® Luminometer LX25 is a simple, quick, and accurate hand held diagnostic tool for cleaning process monitoring that can capture, store, and transmit data for later analysis.

Collecting adenosine triphosphate (ATP) from a contaminated surface in the environment or a surgical instrument is as easy as swabbing with the Clean-Trace® ATP Surface Test.

Synergize is a hospital grade, multi-purpose disinfectant-cleaner with a Quaternary ammonium/ glutaraldehyde combination active chemistry.

A peroxyacetic acid-based sanitizer, descaler, and disinfectant.

A beverage screen kit used with the Neogen® Microbial Luminescence System (MLS) for testing Ultra high temperature (UHT) and ESL beverages.

A rapid microbial detection system using ATP bioluminescence in a microwell based System to detect the presence of microbial ATP in Ultra Heat Treated (UTH) and Extended Shelf Life (ESL) dairy and dairy end products.

Clean-Trace® Surface Positive Control is designed to enhance hygiene monitoring procedures by providing cost effective assurance that hygiene monitoring reagents and instruments are being used and stored correctly to ensure reliable results.

Siloxycide® is the only EPA-approved hydrogen peroxide and silver nitrate disinfectant for poultry and livestock drinking water lines.

Neogen® Microbial Luminescence System Injector Cleaning Kit is intended for daily use with the Neogen® Microbial Luminescence System to help prevent microbial contamination and biofilm formation in the MLS instrument.

Adenosine tri-phosphate (ATP) hygiene monitoring for flexible endoscope reprocessing

BioSentry 904 Disinfectant is a hospital grade broad-spectrum blend of four quaternary ammonium compounds disinfectant recommended for use on hard nonporous surfaces.

AquaPrime Peraside 15 is an EPA, NSF, & OMRI approved peroxyacetic acid-based microbiocide developed for cleaning and disinfecting poultry and livestock drinking water lines.

Neogen® Microbial Luminescence System Ultra High Temperature Dairy Screen Kit is a rapid microbial detection system for use with the Neogen® Microbial Luminescence System (MLS).

A Microwell Plate for use with the Neogen® Microbioal Luminescence System (MLS).

Clean-Trace® Water-Free ATP AQF100 is a single-use test device that contains sample collection rings for the collection of an aqueous sample.

BioSentry® BioPheneTM II is a high activity phenolic disinfectant for use in poultry and swine facilities, animal care facilities, and other livestock and veterinary uses.

BioSentry BioPhene Spray Disinfectant is an EPA-registered, hospital grade, aerosol disinfectant that effectively controls common viruses and bacteria.

COMPANION™ disinfectant wipes are a ready to use wipe that effectively cleans, disinfects and controls odor in one step.

Clean-Trace® Water Positive Control is designed to enhance hygiene monitoring procedures by providing cost effective assurance that hygiene monitoring reagents and instruments are being used and stored correctly to ensure reliable results.

Neogen® Viroxide Super™, a powdered, Peroxygen-based disinfectant, offers rapid broad-spectrum disinfection as part of comprehensive biosecurity program.

Synergize RTU is a multi-purpose disinfectant when used according to disinfection directions and provides a broad spectrum kill of gram-negative and gram-positive microorganisms.

Iodis® is a sudsing iodine cleaner, deodorizer, disinfectant, and sanitizer for use on farm premises, poultry houses, and food plants.

COMPANION Disinfectant is a hospital grade, multi-purpose disinfectant with a Quaternary ammonium/ glutaraldehyde combination active chemistry.