A handheld sanitation verification instrument that accurately detects ATP from surfaces and rinse waters.

The AccuPoint Advanced Surface Sampler is an ATP detection swab uniquely designed for best results from environmental surfaces.

The AccuPoint Advanced Access Sampler is an ATP detection swab uniquely designed for best results from narrow, hard-to-reach areas like filler heads and nozzles.

The AccuPoint Advanced Water Sampler is an ATP detection swab uniquely designed for best results from rinses.

AccuClean Advanced is intended to be used as a simple method to determine the cleanliness of food contact surfaces and equipment.

Verifies instrument calibration. Only compatible with the AccuPoint Advanced Next Generation ATP Reader.

The sampler extender is in use with the AccuPoint Advance ATP Samplers to extend the sampler handle by 6".

Used to clean debris off the lens of the AccuPoint Advanced Next Generation ATP Reader.

Paired with the wall charger for power supply. Also used for data transfer from reader to PC.

Compatible with the AccuPoint Advanced Next Gen ATP reader with interchangeable wall plates for international use.

Protects instrument from impact and provides extra sampler storage.

Compatible with the AccuPoint Advanced Next Gen ATP wall charger.

Clean-Trace® Surface ATP is a single-use test device that contains a swab for the collection of a sample from a surface. The swab is pre-moistened to aid in sample collection and processing.

Clean-Trace® Luminometer is a simple, quick and reliable hand held diagnostic tool to verify cleaning effectiveness and capture, store and manage data for later analysis.

Clean-Trace® Water Plus - Total ATP is designed to rapidly assess equipment sanitation processes and the efficiency of Clean in Place (CIP) procedures.

AccuPoint® Advanced Sanitation Verification System is a handheld ATP reader that accurately detects ATP from surfaces and rinse water samples.

Clean-Trace® Surface Positive Control is designed to enhance hygiene monitoring procedures by providing cost effective assurance that hygiene monitoring reagents and instruments are being used and stored correctly to ensure reliable results.

Neogen® Microbial Luminescence System Injector Cleaning Kit is intended for daily use with the Neogen® Microbial Luminescence System to help prevent microbial contamination and biofilm formation in the MLS instrument.

Clean-Trace® Surface Protein Plus Test Swab is a simple, quick, and reliable method of checking for the removal of protein residues after cleaning and quickly identifies contamination.

ATP reagent control kit for use with the Neogen® Microbial Luminescence System (MLS), 3.0 ng/vial.

Neogen® Microbial Luminescence System Ultra High Temperature Dairy Screen Kit is a rapid microbial detection system for use with the Neogen® Microbial Luminescence System (MLS).

A beverage screen kit used with the Neogen® Microbial Luminescence System (MLS) for testing Ultra high temperature (UHT) and ESL beverages.

A rapid microbial detection system using ATP bioluminescence in a microwell based System to detect the presence of microbial ATP in Ultra Heat Treated (UTH) and Extended Shelf Life (ESL) dairy and dairy end products.

Clean-Trace® Water-Free ATP AQF100 is a single-use test device that contains sample collection rings for the collection of an aqueous sample.

A Microwell Plate for use with the Neogen® Microbioal Luminescence System (MLS).

Clean-Trace® Luminometer LX25 is a simple, quick, and accurate handheld tool for cleaning process monitoring that can capture, store, and transmit data for later analysis.

Collecting adenosine triphosphate (ATP) from a contaminated surface is as easy as swabbing with the Clean-Trace® ATP Surface Test.

Synergize is a hospital grade, multi-purpose disinfectant-cleaner with a Quaternary ammonium/ glutaraldehyde combination active chemistry.

Maintenance solution for use with the Neogen® Microbial Luminescence System (MLS).

Clean-Trace® Water Positive Control is designed to enhance hygiene monitoring procedures by providing cost effective assurance that hygiene monitoring reagents and instruments are being used and stored correctly to ensure reliable results.

Adenosine tri-phosphate (ATP) hygiene monitoring.

BioSentry 904 Disinfectant is a hospital grade broad-spectrum blend of four quaternary ammonium compounds disinfectant recommended for use on hard nonporous surfaces.

COMPANION Disinfectant is a hospital grade, multi-purpose disinfectant with a Quaternary ammonium/ glutaraldehyde combination active chemistry.

Neogen® Viroxide Super™, a powdered, Peroxygen-based disinfectant, offers rapid broad-spectrum disinfection as part of comprehensive biosecurity program.

Iodis® is a sudsing iodine cleaner, deodorizer, disinfectant, and sanitizer for use on farm premises, poultry houses, and food plants.

AquaPrime Peraside 15 is an EPA, NSF, & OMRI approved peroxyacetic acid-based microbiocide developed for cleaning and disinfecting poultry and livestock drinking water lines.

A peroxyacetic acid-based sanitizer, descaler, and disinfectant.

Dyne-O-Might® is a cleaner-disinfectant and ammonia neutralizer made up of a unique patented blend of acids and iodine.

An NSF-approved, OMRI Certified special blend of mineral and organic acids specifically formulated to activate stabilized sodium chlorite for the disinfection of animal drinking water for livestock production operations.

BioSentry® BioPheneTM II is a high activity phenolic disinfectant for use in poultry and swine facilities, animal care facilities, and other livestock and veterinary uses.

AquaPrime® NeoKlor is a 7.5% Sodium Chlorite solution that is EPA, NSF & OMRI approved for usage in drinking water for livestock and potable water disinfection.

AquaPrime® Trigger is a water-soluble acidifier for poultry and livestock drinking water. AquaPrime Trigger is a GRAS proprietary blend of mineral acids formulated to reduce pH in drinking water on poultry and livestock farming operations.